After hours access will be required for all buildings and labs if students wish to use the labs after 7pm on weekdays or any time on weekends. To allow students access to the labs during the entirety of our advertised lab opening times, students may have their Student ID card encoded to provide access during these times.
Students doing a CSE Program or CSE courses will have their access encoded on their Student ID card prior to the commencement of session (provided that these students have a current and valid Student ID card).
General access laboratories in the ME Undercroft (near the Help Desk) and in the EE Undercroft are accessible for the entirety of the advertised lab opening times, so students may use these labs while access is being organised if they have accessible problem.
Please note, there are students who fall in categories for which after-hours access is not granted at all. Please contact the Help Desk or check the following Help Desk webpage for more specific information:
http://www.cse.unsw.edu.au/~helpdesk/services/swipeaccess.html
Table: Location of laboratories and type of hardware*| Laboratory |
Type of |
Operating |
Location |
Num |
| Name |
Hardware |
System |
|
|
| Bell |
PC |
Linux |
J17 G01A |
20 |
| Moog |
PC |
Linux |
J17 G01 |
20 |
| Spoons |
PC |
Linux |
J17 G04A |
20 |
| Leaf |
PC |
Linux |
J17 G04 |
20 |
| Drum |
PC |
Linux |
G17 LG06 |
20 |
| Harp |
PC |
Linux |
G17 LG08 |
20 |
| Tuba |
PC |
Linux |
G17 LG06B |
22 |
| Oboe |
PC |
Linux |
G17 LG07 |
20 |
| CHI |
Apple |
Mac |
K17 G11 |
21 |
| Lyre |
PC |
Linux |
K17 G12 |
20 |
| Banjo |
PC |
Linux |
K17 G13 |
23 |
| Oud |
PC |
Linux |
K17 G14 |
23 |
| Bugle |
PC |
Linux |
J17 G14 |
21 |
| Pipe |
PC |
Linux |
J17 G15 |
21 |
| Piano |
PC |
Linux(Win) |
K14 LG18 |
20 |
| Organ |
PC |
Linux(Win) |
K14 LG19 |
20 |
| Clavier |
PC |
Linux(Win) |
K14 LG20 |
20 |
*All of the numbers provided are subject to change. Please see http://www.cse.unsw.edu.au/help/computing/facilities/index.html for updated information.
*Course specific software may only be installed in certain laboratories. You will be informed of any specific software to be used in any of your courses by your lecturers.
|
Figure 1.1: The J17 laboratories and printers. |
Figure 1.2: The G17 ground floor laboratories and printers. |
Figure 1.3: The K17 laboratories and printers. |
Figure 1.4: The K14 laboratories and printers. |
Figure 1.5: Printer legend. |
Loc Van Huynh 2007-03-15